Important Notices

Important Notices

June 29 2019 - Support for Ryzen B550 motherboards will be added within a few days.  Contact us if you'd like the pre-WHQL beta.

June 9 2020 - Windows container issues (e.g., Windows Sandbox and OneDrive Personal Vault) described in previous bulletins have been resolved with the release of FuzeDrive v1.6.0.

June 1 2020 - AMD StoreMI 1.5 or earlier users.  AMD has opted to no longer distribute or support AMD StoreMI released prior to March 31st.  
To stay current with updates and receive technical support directly from Enmotus, we recommend you upgrade your StoreMI ver. 1.x software to the fully compatible FuzeDrive software.

August 9 2019 - The Xbox Game Pass issue described in previous bulletins has been resolved with the release of FuzeDrive v1.5.2.

April 16 2019 - A disk drive that was formerly part of a non-bootable or MBR bootable FuzeDrive will not be visible in Windows setup if the FuzeDrive was not deleted.  See Cleaning Drives During a Windows Setup

April 16 2019 - After reinstalling on a disk drive that was formerly part of a UEFI bootable FuzeDrive without cleaning the disk as described in the link referenced above, you may be informed that you cannot create a second FuzeDrive. This is because there is still stale metadata from the previous tier. Open an Administrator PowerShell or command prompt and enter:
ecmd --delete_all    Note: Be careful with this command, as it will destroy a working tier and the data on it.

April 16 2019 - If in MBR /  Legacy boot mode you will be limited to 2TB. See Dealing With Legacy Boot Drives and the 2TB Limit



    • Related Articles

    • Deleting FuzeDrive and VirtualSSDs

      Important: The following steps deletes the FuzeDrive and ALL DATA that is stored on each of the drives. All data is completely lost on the FuzeDrive and/or underlying drives so only use this option under the following circumstances. (a) you have ...

    • Cleaning Drives Using Diskpart

      When trying to create a data FuzeDrive preserving data and the error message "For transform data, only one drive may have a partition" appears, this means you need to clean one of your drives. IMPORTANT: The following steps will completely erase all ...

    • Cleaning Disks Previously Used as a FuzeDrive during Windows Setup

      When to Use The following steps are only necessary if re-using FuzeDrive disks from a previous installation in a new installation and you are experiencing difficulties getting Windows to recognize the disks or trouble with getting the FuzeDrive ...

    • Uninstalling FuzeDrive

      Background Once a disk has been converted to a FuzeDrive, the data begins to be distributed across the two different tiered storage devices. Depending how long you have been using the FuzeDrive, the data may be widely distributed (as is typical in a ...

    • What happens when I expand a legacy boot drive capacity by more than 2TB?

      For systems running in legacy boot mode, all disk sizes are limited by the OS to 2TB in size. This can cause some confusion when expanding boot drives to greater than 2TB. To work with boot or data drives greater than 2TB your MUST upgrade your ...