When the FuzeDrive software detects a configuration error on bootup for a data FuzeDrive, depending on the severity of the failure, it may end up in a state where it will not longer automatically mount (or appear) on a reboot. This is a feature designed to prevent further damage to any data in the event the system is experiencing memory corruption issues for example.
Examples of issues that can cause FuzeDrive to not mount correctly:
- A drive has been disconnected or removed - reconnect and it should remount if all is well.
- There is a bad cable in the system - check the cables to make sure they are not loose or become disconnected. Restart the PC.
- The FuzeDrive is reporting VMAP errors after an abnormal shutdown or reset of the machine.
In the case of the FuzeDrive errors, you can temporarily test if the FuzeDrive is mountable using the following command from an Administrator command line or powershell window:
ecmd --attach t=0 --force
This will force the FuzeDrive to remount and the file system on the FuzeDrive should be visible once again. See the FuzeDrive software help in the system tray application on how to handle any VMAP errors to permanently fix the error. As always, it is recommended you backup your data once you have it visible before making further changes to the system.
Note, if for any reason the fix involves help from the Enmotus support teams and you prefer to always override the automatic dismount on error, the following option may allow the software to mount regardless of errors on subsequent reboots:
ecmd --loadonerror on t=0
Related Articles
Deleting FuzeDrive and VirtualSSDs
Important: The following steps deletes the FuzeDrive and ALL DATA that is stored on each of the drives. All data is completely lost on the FuzeDrive and/or underlying drives so only use this option under the following circumstances. (a) you have ...
Uninstalling FuzeDrive
Background Once a disk has been converted to a FuzeDrive, the data begins to be distributed across the two different tiered storage devices. Depending how long you have been using the FuzeDrive, the data may be widely distributed (as is typical in a ...
System Requirements For FuzeDrive
Is my system compatible with Enmotus FuzeDrive™? FuzeDrive installation is simple and only takes about 5 minutes. Remember, always back up your data prior to installation of any new software. FuzeDrive requires Windows 10, and is compatible with ...
System Information Required for Support Tickets
Before contacting support, please ensure you have read the FAQ, the online Knowledge Base and also the User Guide to see if these help. If they do not answer your questions, then when submitting a ticket to the Enmotus support team, if possible, ...
Troubleshooting FuzeDrive Operation/Performance
Slow Performance If you have just created your tier, and your data started off on your slow drive, please be patient as it can take a while (perhaps a day) of normal usage, followed by sufficient time for your data to be moved to your fast drive. ...